User Manual

To prepare the Trifecta 2.0 to
drive in the open position,
release the rear (tailgate)
clamps and fold the
cover forward.
Fold the cover forward
and fasten BOTH straps
in the middle section
to the front rail.
IMPORTANT: Before folding
the second section of the
cover, the rear (tailgate) clamps
must be stowed securely
into the rail.
Do NOT tow your vehicle from the rear with
any Extang bed cover on your truck
Front (cab
clamp)
Rear (tailgate
clamp)
Add clamp
plate as shown
here
Front (cab clamp)
Rear (tailgate
clamp)
Add clamp
plate as shown
here
Special Instructions for Alternative Brackets
IMPORTANT NOTICE
While driving, the cover must be completely flat and secure with all four clamps
in the closed position or completely folded up (all panels) and secured
at the cab. DO NOT DRIVE with the cover in a partially open position.
Remove any snow or foreign matter
before folding
IMPORTANT
Re-tighten the front / cab clamps after the first week of driving the vehicle.
Also periodically check the clamps to ensure they are secure.