Installation Manual

Front (cab clamp)
Front (cab clamp)
Front (cab clamp)
Front (cab clamp)
Rear (tailgate clamp)
Rear (tailgate clamp)
Rear (tailgate clamp)
Ford SportTrac
Hook
clamp
directly
into factory
rail
Add clamp plate
as shown here
Add clamp plate
as shown here
Add clamp plate
as shown here
Clamping
Bracket (x4)
2. Attach clamping
brackets using the factory
6mm screw in the lower
exposed hole.
1. Locate and remove
6mm screws and
washers from bed wall
in four corners
as shown.
Add clamp plate as shown here
Adjust tension
by moving
tension nut
into handle
1/2” - 5/8”
3. Slide front (cab) clamp out
to front clamp bracket and
latch under lip, tighten by hand.
4. Slide rear (tailgate) clamp
out to rear clamp bracket
pull down and latch under lip.