Installation Manual

ManualsBrandsExtang ManualsAutomotiveExtang Solid Fold 2.0 Hard Folding Truck Bed Tonneau Cover | 83430 | fits Dodge Ram (6 ft 4 in) 09-18, 2019 Classic 1500

3 1 8 2 2 0 1 7 - 3 0

The SolidFold 2.0 truck bed cover

comes fully assembled.

Note any damaged or missing

components before installing.

It is important that all areas

where the bed cover mounts

are clean and free of debris

prior to installing.

Unfold the cover fully and adjust position

over the truck bed for proper

front (cab) / rear (tailgate) alignment.

Carefully refold the cover without

shifting its position on the truck bed.

Place assembled cover over the cab

end of the truck box.

Item No. 31822017-30 04.17 DD

Extang, Corp., 2017. Printed in USA

Summary of content (8 pages)

PAGE 1
The SolidFold 2.0 truck bed cover comes fully assembled. Note any damaged or missing components before installing. It is important that all areas where the bed cover mounts are clean and free of debris prior to installing. Place assembled cover over the cab end of the truck box. Unfold the cover fully and adjust position over the truck bed for proper front (cab) / rear (tailgate) alignment. Carefully refold the cover without shifting its position on the truck bed.
PAGE 2
If your truck has a bed cap or bedliner that covers the metal bed wall ange, you will need to remove enough so that all the clamps make solid contact. For bed caps, trim only enough of the bed cap edge so the rear (tailgate) clamp contacts the bottom of the metal ange. For bed liners that cover the metal ange, trim a minimum of 100 mm or 4” of the liner wall so the clamps contact the bottom of the metal ange. 100mm 4.
PAGE 3
To prepare the Solid Fold 2.0 to drive in the open position, release the rear (tailgate) clamps and fold the cover forward. Remove any snow or foreign matter before folding IMPORTANT: Before folding the second section of the cover, the rear (tailgate) clamps must be stowed securely into the rail. Fold the cover forward and fasten BOTH straps in the middle section to the front rail.
PAGE 4
Cab Buckle Kit 31830002 Cab Hinge 83xxx-63 Front (cab) Clamp 1288 Cab Rail Seal * 83xxx-60 Hinge Seal 32560669 Tie Down Kit 31831010 Cab Hinge Cap Kit 31830010 Tail Hinge Cap Kit 31830020 83xxx-62 Latch Pocket Cover 35830102 Rear (tailgate) Clamp 31003005 Spacer Pad 32622500 Tail Rail Seal * Side Rail Seal * Tail Hinge 83xxx-64 Extang Corp., 2017 Printed in U.S.A.
PAGE 5
Rear (tailgate clamp) Front (cab clamp) Add clamp plate as shown here Front (cab clamp) Add clamp plate as shown here Front (cab clamp) Ford SportTrac 1. Locate and remove 6mm screws and washers from bed wall in four corners as shown. Adjust tension by moving tension nut into handle 1/2” - 5/8” Add clamp plate as shown here Clamping Bracket (x4) 2. Attach clamping brackets using the factory 6mm screw in the lower exposed hole. Rear (tailgate clamp) 3.
PAGE 6
TRUCK ACCESSORIES RECOMMENDED BY EXTANG ULTIMATE TRUCK BED PROTECTION BedRug is a pioneer and industry leader in the development and manufacturing of molded, closed cell polypropylene foam bed liners. Bed liners protect the truck bed from daily wear-and-tear and improve the vehicle’s general appearance and utility, extending the useful life and resale value of the truck. For more information call customer service at 800-462-8435 or visit: bedrug.
PAGE 7
EXTANG LIMITED WARRANTY FOR THE FOLLOWING TRUC K BED COVERS: ENCORE TONNO, SOLID FOLD 2.0 & SOLID FOLD WARRANTY DURATION Extang offers three years of coverage from the date of purchase. Warranty is limited to original purchaser of truck bed cover and is non transferable. WARRANTY CONDITIONS This warranty is against defective materials or workmanship.
PAGE 8
SOMETHING DAMAGED? MISSING PARTS? CALL US FIRST 800-877-2588 WE CAN HELP YOU QUICKLY AND EASILY OVER THE PHONE RAPID RESPONSE OVERNIGHT DELIVERY Experienced Customer Service staff are available to answer all your truck bed cover questions CUSTOMER SERVICE 8:30 TO 7 EST, MONDAY - FRIDAY Tonno Model: ________________________________________ Purchase Date:_______________________________________ Lot Code:____________________________________________ Lot code can be found on underside of cover.