Installation Manual

ManualsBrandsExtang ManualsAutomotiveExtang Tuff Tonno Truck Bed Tonneau Cover | 14425 | fits Dodge Ram (5 ft 7 in) 09-18, 2019 Classic 1500

PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility.

I N S TA L L AT I O N S H E E T

“U” Shaped Clamps

Note: LONG BED trucks

have 8 clamps and 4 bows.

Remove paper tape from all

rails. Discard properly.

Foam has NO adhesive to

touch truck finish.

Wash truck bed.

Spring Bows

(x3-Short Bed)

(x4-Long Bed)

P L E A S E

D O N O T

L I T T E R

Corner Pieces

(Saber Tonno corners are

silver die-cast zinc)

DOUBLE HOOK

Side Rail Clamps

Allen Wrench

Clamp Bolts

Tarp

Bows

Reinsert corner piece into

cab rail until it “clicks”

and locks into place.

Feed tarp dowel into

cab rail. NOTE: For

easiest feeding

action, place tarp on

a flat smooth surface,

and keep dowel

straight while feeding

into cab rail.

Caution,

pavement may

scuff tarp.

Depress the LeverLock

mechanism, release,

and remove one corner

from cab rail.

Off the truck bed,

connect the end rails

to the two side rails.

Cab Rail

Tailgate Rail

Side Rails

Summary of content (2 pages)

PAGE 1
IN S TA L L AT I O N S HEET DOUBLE HOOK Side Rail Clamps Spring Bows (x3-Short Bed) (x4-Long Bed) Sid i Ta Ca at lg b e s Tarp l i Ra Ra il eR ail Bows Corner Pieces (Saber Tonno corners are silver die-cast zinc) Clamp Bolts “U” Shaped Clamps Note: LONG BED trucks have 8 clamps and 4 bows. Allen Wrench PARTS INCLUDED IN YOUR KIT. You may want to lay them out in this manner for accessibility. 2 1 Foam has NO adhesive to touch truck finish.
PAGE 2
For an OVER-THE-RAIL Bedliner 5 Off the truck bed, connect the end rails Place assembly to the two side rails. over truck box. Center between cab and tailgate. DIAGRAM DIAGRAM A B For each clamp mark on your bedliner a 1-1/2” x 3” hole as shown above. Remove clamp. Cut holes in bedliner. Reinsert side rail clamp. Return to step 5. 6 Insert side rail clamp all the way into rail.