User Manual
4-Port Gigabit Ethernet to PCIe Host Adapter
6
You will see only the Port 1 shown on Windows Device Manager, assigned as
Ethernet Port #1
8. Set switch Pin 2 to ON while still keep Pin 3 and 4 at OFF, Windows then install
the drivers for Port 2 and adds Ethernet Port #2 to its Device Manager
9. Set switch Pin 3 to ON, adds Ethernet Port #3
10. Set switch Pin 4 to ON, adds Ethernet Port #4
After installed the drivers for all ports, you are ready to plug the Network Cable to
the RJ45 connectors of the Product.
Power requirements: 3.3V DC, 1.1A (max)
Operating temperature: 0 to 55C (32 to 131F)
Operating humidity: 5 to 95% RH
4. Environmental Specifications