User Manual

4-Port Gigabit Ethernet to PCIe Host Adapter
3
JP1: AUX Power Enable/Disable Settings
Jumper Position
Settings
Stand-by Power is disabled (Default):
The Product is not powered by the Stand-by power
(3.3V AUX) when the system is powered off
Stand-by Power is enabled:
The Product is powered by the Stand-by power when
the system goes to sleep or is powered down
Switch Description:
Switch Pin#
Ethernet Port
Controlled
Switch Positions
Description
1
Port# 1
OFF
Disabled*
ON
Enabled* (Default)
2
Port# 2
OFF
Disabled
ON
Enabled (Default)
3
Port# 3
OFF
Disabled
ON
Enabled (Default)
4
Port# 4
OFF
Disabled
ON
Enabled (Default)
◼
*Switch Pin# 1 also controls the onboard Windows drivers. When it is set ON, it
enables the drivers. Otherwise, it disables the onboard Windows drivers.