User Manual

4-Port Gigabit Ethernet to PCIe Host Adapter
2
Features:
✓ Fully PCI Express Gen 2 Specification Compliant
✓ Supports Low Profile Form Factor
✓ Compliant with USB Specification 3.1 Gen 1
✓ Onboard Windows Drivers, no Extra Driver is Required for Installation in major
Windows
✓ Adds 4 RJ45 Gigabit Ethernet Ports (10/100/1000M)
✓ A DIP Switch to Enable/Disable Each Port
✓ Supports IEEE 802.3, 802.3u, and 802.3ab, 802.1Q
✓ Supports IEEE 802.3az-2010 (Energy Efficient Ethernet)
✓ Supports Jumbo Frames up to 9K Bytes
✓ Supports Microsoft AOAC (Always On Always Connected)
✓ LEDs for Ethernet Status and Data Transferring Speed
✓ Supports Windows, Mac OS and Linux
J4: RJ45 Connectors and LED Indicators:
⚫
RJ45 Ethernet Connectors: The 4 10/100/1000Mbps Ethernet ports. They
support auto cross-over feature. You can use the same cable to connect to
either a Hub/Switch or a host computer.
⚫
LAN LED Indicators: There are 2 LEDs on each RJ45 connector, they are
described as the following table:
LED Name
Color
LED Function
Link/Act
Green
Steady on: The Connection on the Ethernet port is
built and Active
Blinking: Transferring Ethernet Data
Off: Ethernet Port Disconnected
Speed
Yellow
Off: 10/100Mbps Mode
Steady on: Gigabit (1000Mbps) Mode