Product specifications
RS232 to WiFi Wireless Adapter w/ Mounting Kit
2
5-pin Terminal Blocks: This pluggable terminal blocks integrates 2
wide-range DC power input pins and 3 RS232 signal pins. You can
choose to power the WiFi-Adapter by either applying +5V on the
DC Jack OR +5V~40V on the Terminal Blocks (but not both
simultaneously).
Push Button to Restore Default Settings: This switch can be used to
reset the WiFi-Adapter to its factory default settings. Press and hold
the button by a pen or similar tool for several seconds will restore
the default settings immediately.
DC Jack Power Connector: A 5V/2A AC adapter is supplied with
this product. Please connect its power cable to this DC Jack
connector.
LED Indicator: The white color LED is a Heartbeat indicator, it is
blinking when the WiFi-Adapter is powered up and function
properly.
Wide Range DC Power Input
GND
GND
RXD (RS232, Output)
TXD (RS232, Input)
+5~40V DC
GND
GND
RXD
TXD
Push Button to Restore
Default Settings
+5VDC Power
Input DC Jack
Mounting Kit