Specifications

2
4S Serial RS-232 Mini PCIe card
3. Installing the Mini PCIe Card
Mini PCIe Socket
Holding screw
White dot next to pin 1
1. Remove the Mini PCIe card from its protective antistatic packaging, remove the
screw holding the Mini PCIe card to the motherboard and insert the new Mini
PCIe card into the socket.
2. Put the Mini PCIe card onto the motherboard and attach it with the screw.
3. Install the serial flat cables. Please mind the pin 1 position marked with the white
dot.
3
4S Serial RS-232 Mini PCIe card
4. Installing the Combo PCI Card
1. To install the Windows drivers, there are two methods, one is to run the setup utility
(StnSetup.exe) in each corresponding folder. The other one is by the Windows’
driver installation Wizard. We recommend you run the setup utility. It will be sim-
pler. However, PLEASE REFRESH HARDWARE OR REBOOT THE SYSTEM IN
CASE YOUR DRIVER DID NOT TAKE EFFECT AFTER RUNNING THE SETUP
UTILITY.
The drivers are shipped in the following folders on the driver CD:
E:\IO\MOSCHIP\MCS99xx
Drivers are in each corresponding folder
Driver Uninstalling Program
Driver Installing Program