Datasheet

USB 3.1 und SATA 3 to M.2 or mSATA SSD Adapter
(M.2 or mSATA SSD alternative)
System / OS
Geprüft / Approved
Feature
 M.2 SSD(SATA I/F) to USB 3.1/10Gbps & SATA III convert
 mSATA SSD to USB 3.1/10Gbps & SATA III convert
 Build in USB3.1 B-type connector
 Build in SATA 7+15pin connector
 Build in M.2 (NGFF) B-key Female connector
 Build in Mini PCI-e(mSATA) Female connector
 D1 LED on indicates M.2 / mSATA SSD power OK
 D2 LED on indicates USB3.1 for SSD active status
 D3 LED indicates M.2 / mSATA SSD active status
 Power from the USB B-Connector for 5V
Support Form Factor
 Support SATA Reversion 3.2
 PCI Express M.2 Spec. Revision 0.7, Version 1.0
 Universal Serial Bus 3.1 Specification
 PWM synchronous buck converter Power IC for M.2 or
mSATA SSD Device
 3A maximum output current
 Size: 100.0 x 85.0mm
 Operating Temperature : 0°C up to 55° Celsius
 Storage Temperature: -40°C up to 75° Celsius
 Rel. Humidity: 5% to 95%
 Weight: 200g
 Packaging contents: EX-3674, Fixed Kits
USB 3.1 (Gen2) & SATA3
EX-3674
Support M.2
Type 2280-D2-B-M: 80mm (L) x 22mm (W)
Type 2260-D2-B-M: 60mm (L) x 22mm (W)
Type 2242-D2-B-M: 42mm (L) x 22mm (W)
Type 2230-D2-B-M: 30mm (L) x 22mm (W)
Specification
Support mSATA
Full size: 50.95 mm (L) x 30 mm (W)
Half size: 26.8 mm (L) x 30 mm (W)