User manual
Qleaf Go Table of contents Congratulations on your purchase of the Qleaf Go, your personal sound amplifier. The Qleaf Go is a situational listening device that assists you when you need to hear people better in difficult listening environments.
4 5 I 4 II III I II 5
6 7 II I tragus 6 7
1 In the box A B C D E F Qleaf Go module Qleaf Go soft tip package Battery Battery ejection tool Carrying box Qleaf Go User manual 2 Placing the battery While using a new battery: first remove the sticker from the + pole. Hold the module and insert the battery as indicated. 3 Eject the battery 8 4 Inserting Qleaf Go in the without soft tip around it) between your fingers and pull it out of the soft tip. soft tip I Insert the module into the soft tip with the CE mark first and visible.
three beeps will be audible indicating that program three has been activated. While program four is active, after a gentle tap one beep becomes audible and the device sets back to program one. Cleaning The production of ear wax differs from one person to another. Therefore it cannot be avoided completely that the sound outlet of the soft tip will be clogged with ear wax. Although the sound volume may reduce because of clogging, this should normally not damage your device.
• • • • • 12 environments. Adjust the volume with AirTAP™ just high enough for good speech understanding Ringing ears might be a sign that the volume level is too high. Adjust the level by using AirTAP™. Before inserting Qleaf Go into the ear, have your ears checked. If there is excessive ear wax in your ear canal, have it cleaned first. Do not do this yourself. Always turn to an ENT doctor, a physician or an audiologist for this procedure. Never use the Qleaf Go module without the soft tip.
with the owner’s or user directions, rough treatment, exposure to moisture, damp or extreme thermal or environmental conditions or rapid changes in such conditions, corrosion, oxidation, non-permissible alterations or connections, non-permissible openings or repairs, incorrect use, improper installation, accidents, spilling of food or liquids, the influence of chemical products or other facts over which ExSilent cannot reasonably have control (including but not limited to defects in consumable components, s
EN V1.0 01/2012 15-208 © 2012 ExSilent. All rights reserved.
