Operation Manual
A
B
C
5
2
3
9
10
11
+
-
8
7
6
1
4
English
6 7
English
Q - module (A)
Pushbutton(7)
After the Q has been set up with more than one program (memories), the push button can be
used to select between various programs. For a description about how it works, please refer to the
chapter ‘Switching between programs’ (pg. 17).
Programmingcontact(6)
Using the programming contact, the settings of the Q can be changed by your dispenser.
Microphoneopening(8)
Here the microphone is located that picks up the sound, which is processed and amplified by the
Q.
Casing(A)
The casing has been made of durable plastic. For the maintenance of the casing, please refer to
the chapter ´Maintenance and use´ (pg. 18).
Sealingring(4)
The sealing ring ensures an acoustic closure between the casing of the module (A, image) and the
soft tip (B, image).
Batterycompartment(2)
This compartment comprises of the battery - a type 10 cell battery – that provides the power supply
for Q. The device is switched off upon the removal of the battery.
Q´s anatomy
A Q-module(casing)
1 Small battery contact (- pole)
2 Battery compartment
3 Large battery contact (+ pole)
4 Sealing ring
5 Speaker opening
6 Programming contact (with
protective cap)
7 Push button
8 Microphone opening
B Softtip
9 Pull cord
10 Lamellas
11 Soundopening
C Battery(type10)
+ Plus pole
_
Minus pole