User Manual
Table Of Contents
- 1. Introduction
- 1.1. Downloads & Updates
- 1.2. Installation
- 2. Touché
- 2.1. Overview
- 2.1.1. What is Touché ?
- 2.1.2. Slave and Standalone
- 2.1.3. Default Behaviour
- 2.2. Mechanism
- 2.2.1. Concept
- 2.2.2. Shiftings
- 2.2.3. Skin
- 2.2.4. Cylinders
- 2.2.5. Slider
- 2.3. Controls
- 2.3.1. Buttons
- 2.3.2. Encoder
- 2.3.3. LEDs
- 2.4. Connectivity
- 2.4.1. Ports
- 2.4.2. Data
- 3. Lié
- 3.1. Overview
- 3.1.1. What is Lié ?
- 3.1.2. System Requirements
- 3.1.3. Plug-in Formats
- 3.2. Interface
- 3.2.1. Menu
- 3.2.2. Settings
- 3.2.3. Browser
- 3.2.4. Slot Center
- 3.2.5. Plug-In Preset Specificities
- 3.2.6. Hardware Preset Specificities
- 3.2.7. Memory View
- 3.2.8. Scope
- 3.2.9. Sensitivity Curve Editor
- 4. Workflow
- 4.1. DAW Setup
- 4.1.1. Ableton Live
- 4.1.2. Logic Pro
- 4.1.3. Cubase
- 4.1.4. Presonus Studio One
- 4.1.5. GarageBand
- 4.2. Creating a new plug-in preset
- 4.3. Creating a new hardware preset
- 4.4. Loading a hardware preset in Touché’s internal memory
- 4.5. Adjusting your sensitivity
- 4.5.1. By Parameter
- 4.5.2. For the Top and Bottom Shiftings
- 4.5.3. For the Left and Right Shiftings
2.2.3. Skin
The wooden surface at the top of Touché is conceived to give you a great, smooth instrumental touch. This skin is
magnetised in order to be removed and locked easily, making an easy access to the Cylinder and the Slider
underneath.
Be careful when replacing it, it must be put in the right position.
The Cylinder must face the two little wooden parts, otherwise the skin won't be properly magnetised.
2.2.4. Cylinders
The top and bottom Shiings use cylinders, which are responsible for Touché's pressure feedback.
One is located just under the Skin , another is underneath Touché, inside the little trapdoor.
Both cylinders can be removed from their support by releasing them from their rail. Do not try to take them off
directly by pulling them or you might irreversibly damage them.
2.2.5. Slider
Under the Skin, you will find a Slider which allows you to adjust the sensitivity of the le and right Shiings.
•
By placing the Slider on the bottom position, it will loosen the right and le Shiings.
•
By placing the Slider on the upper position, it will stiffen the right and le Shiings
Learn more in the Adjusting your sensitivity section.
Expressive E
Touché User Manual v.1.2
Page of 8 37