User Manual
Table Of Contents
- 1. Introduction
- 1.1. Downloads & Updates
- 1.2. Installation
- 2. Touché
- 2.1. Overview
- 2.1.1. What is Touché ?
- 2.1.2. Slave and Standalone
- 2.1.3. Default Behaviour
- 2.2. Mechanism
- 2.2.1. Concept
- 2.2.2. Shiftings
- 2.2.3. Skin
- 2.2.4. Cylinders
- 2.2.5. Slider
- 2.3. Controls
- 2.3.1. Buttons
- 2.3.2. Encoder
- 2.3.3. LEDs
- 2.4. Connectivity
- 2.4.1. Ports
- 2.4.2. Data
- 3. Lié
- 3.1. Overview
- 3.1.1. What is Lié ?
- 3.1.2. System Requirements
- 3.1.3. Plug-in Formats
- 3.2. Interface
- 3.2.1. Menu
- 3.2.2. Settings
- 3.2.3. Browser
- 3.2.4. Slot Center
- 3.2.5. Plug-In Preset Specificities
- 3.2.6. Hardware Preset Specificities
- 3.2.7. Memory View
- 3.2.8. Scope
- 3.2.9. Sensitivity Curve Editor
- 4. Workflow
- 4.1. DAW Setup
- 4.1.1. Ableton Live
- 4.1.2. Logic Pro
- 4.1.3. Cubase
- 4.1.4. Presonus Studio One
- 4.1.5. GarageBand
- 4.2. Creating a new plug-in preset
- 4.3. Creating a new hardware preset
- 4.4. Loading a hardware preset in Touché’s internal memory
- 4.5. Adjusting your sensitivity
- 4.5.1. By Parameter
- 4.5.2. For the Top and Bottom Shiftings
- 4.5.3. For the Left and Right Shiftings
4.3. Creating a new hardware preset
You can find the latest versions of hardware presets here : https://www.expressivee.com/downloads .
To create a new hardware preset, connect Touché to your synthesizers with a standard MIDI cable and our MIDI to
Jack 3”5 break-out cable. Make sure that Touché is also connected to your computer, and speaks to Lié.
Also make sure that your synth is on the same MIDI channel as Touché (by default Touché sends data to the MIDI
Channel 1).
Receiving MIDI information can also be an option to choose in your synth that may not be activated by default on
your synthesizer. Check the manufacturer's manual and make sure this option is enabled.
1. Click on “NEW HARDWARE PRESET” in the Menu or select a Hardware MIDI Template.
2. Select the CV Page or the MIDI Page.
Expressive E
Touché User Manual v.1.2
Page of 32 37