User Manual

5.2.3. I can not update the firmware of my Touché SE.
If you encounter problems during the firmware update, please check that your Touché SE is not connected via a
USB hub or any other USB interface. Your Touché SE must be connected directly to your computer with the USB
cable provided with the Touché SE.
If the firmware update does not start, or if your Touché SE remains in standalone mode, do not hesitate to force the
unit into bootloader mode (refer to section 5.1.1).
In general, for any questions, you can refer to the "help" tab of the ExpressiveE website at www.expressivee.com .
Expressive E
Touché SE User Manual v.1
Page of 36 36