User Manual

•
Copy the logfiles to the desktop : Creates a system report file when you click on “Get Logger file”. The file will be
created on the desktop, named “expressiveeLogfile.zip”. It is an useful file to join if you report a bug.
•
Install Firmware : Click on “Install firmware” to start the update. Do not unplug Touché SE or quit Lié while the
firmware is updated. This operation may take a few moment. While the firmware is updated, Touché SE’s LEDs are
pink, meaning that Touché SE is in bootloader mode. If the firmware’s update fails, Touché SE will stay in this
mode, waiting for a new firmware. You can force Touché SE to switch to bootloader mode by pressing both
Buttons and the Encoder at the same time when plugging Touché SE. If you’re using a DAW within Windows and
you try to perform a firmware update, it is possible that Lié sends you a message saying you have to disable the
MIDI inputs of Touché SE within your DAW MIDI settings. This is because your DAW is blocking the MIDI connection
which needs to be used exclusively by Lié in order to perform the update. To solve this issue, please head to the
preference menu of your DAW, choose the MIDI section and deactivate the inputs & outputs named
“TOUCHE_BOOTLOADER”.
•
Disable check about preset modification : disable the pop-up window which appears when you change a
modified preset without saving it."
Expressive E
Touché SE User Manual v.1
Page of 14 36