User Manual

2.4. Connectivity
2.4.1. Ports
USB
Touché SE is USB powered. You can power it by plugging it to a compute. 0.1A from your USB port is required to
power Touché SE.
In order to connect Touché SE, we recommend to use the USB cable supplied. You can use any suitable USB cable
but we strongly recommend to use short USB cables (less than 2 meters), labeled with an identification code that
ends with "24/2C", "24AWGX2C" or "AWG24X2C".
Expressive E
Touché SE User Manual v.1
Page of 10 36