Instructions / Assembly

Syem Connections

You may have already completed some or all of these connections in previous eps. Make sure to remove

any plugs before inalling Tubing. Use the provided Lock Clips to secure any Tubing connections.

A to B Connect the RED Tubing to the Feed Water Adapter Valve (point A), then to the hole marked as “IN”

on the Leak Stop Valve (point B).

C to D Connect the WHITE Tubing to the hole marked as “OUT” on the Leak Stop Valve (point C), then to the

Sediment Filter Housing’s Male Elbow Fitting (point D).

E to F The RED Tubing is already connected to the Automatic Shut-O Valve (point E), connect the loose end

to the Carbon Block Filter Housing’s Male Elbow Fitting (point F).

G to H Connect the BLACK Tubing to the Flow Rerictor side indicated by the arrow on the Rerictor (point

G), then to the Drain Saddle (point H).

I to J Connect the YELLOW Tubing to the Inline Po Carbon Filter’s Stem Run Tee (point I), then to the Water

Storage Tank’s Tank Valve (point J).

K to L Connect the BLUE Tubing to the Stem Elbow at the end of the Inline Po Carbon Filter (point K), then

to your RO Faucet connection (point L).