Manualshelf

Installation Manual

ManualsBrandsExpress Water ManualsHome & KitchenExpress Water – Post Activated Carbon PAC Water Filter Replacement – 5 Micron Inline Filter – 10 inch Quick Connect – Under Sink and Reverse Osmosis System
12345
For more in depth instructions refer to your user manual
1.
You will need a clean cloth, dish soap, and appropriate Sediment, GAC, and Carbon Block Filters.
(We also recommend a bucket or bin large enough for the system to sit in. The system will release
water when it is disassembled.)
2.
Turn off the Cold Water Supply connected to the RO System, the Feed Water Adapter Valve, and
the Tank Valve. Then open the RO Faucet handle to release pressure, close handle when the flow of
water stops.
3.
Place the RO System in the bucket and unscrew the 3 Pre Filter Housings using the Filter Housing
Wrench. Remove old filters and dispose of them.
4
. Wash the Pre Filter Housings with dish soap then proceed to rinse until all soap is removed.
5.
Ensure that your hands are washed clean before unwrapping the new filters. After unwrapping,
place the new filters inside their correct housings. Make sure the O-Rings are in their proper
locations.
6. Tighten the Pre Filter Housings using the Filter Housing Wrench. Do not overtighten.
Housing Wrench
SED
Filter
Towel
Soap
ACB
Filter
GAC
Filter
Pre-Filter Change