Use and Care Manual

Sy󰎣em Connections

You may have already completed some or all of these connections in previous 󰍰eps. Make sure to remove

any plugs before in󰍰alling Tubing. Use the provided Lock Clips to secure any Tubing connections.

A to B Connect the RED tubing to the Feed Water Adapter Valve (point A), then to the hole

marked as “IN” on the Leak Stop Valve (point B).

C to D Connect the WHITE tubing to the hole marked as “OUT” on the Leak Stop Valve (point C),

then to the Sediment Filter Housing’s Male Elbow Fitting (point D).

E to F Connect the RED tubing to the Carbon Block Filter Housing’s Male Elbow Fitting (point E),

then to the Drinking Water Faucet Connector (point F).