Owner`s manual

www.exposurelights.com

RedEye rear light: Encased in a tough CNC machined aluminium body

and fully waterproof, the RedEye is possibly the brightest rear light on the

market. It uses the same 240Lumen P4 LED as the Joystick MaXx-2 but in red.

Because it’s so bright it is designed to run at approximately one third of MaXx

setting. Burn times will be slightly reduced on your front light when running the

RedEye. See web for details.

The RedEye is Velcro attached to helmets, seat posts or racks where you like

and is provided with power cable to reach from post to handlebars. Excess

cable is wound round the light body.

Be clearly seen from the rear both Day and Night. RedEye comes highly

recommended to road cyclists even in daylight hours. It is so bright you can

easily be seen with this accessory.

REDEYE REAR LIGHT

New for 2009 Exposure lights come with Smart Port Technology. There is the

option to run various accessories from the Power Port such as the RedEye

rear light or the RedEye Micro light. These are available to purchase from your

Exposure dealer.

If you are a cyclist using the Exposure Light you will be aware of how

important it is to be seen from behind as well as from the front to remain

safe from other road users. A feature of Smart Port Technology is to activate

the Charge Port to become a Power Port and to power the new RedEye

rear lights.

To activate Power Port: When the light unit is off, press and hold the function

button for 5 seconds. The main LEDs will rapid ﬂash to indicate you have now

powered up the port.

You can not operate the RedEye without turning on the main light unit as well.

Turn on the light unit in the normal way with double click. Again a rapid ﬂash

shows as the light turns on. This indicates you now have the light on with the

Power Port activated.

Now plug in RedEye or RedEye Micro and you will get a bright, constant

output of red light from the accessory.

With Power Port activated you can use all the front LED light modes as normal.

When you turn off the light unit it will reset itself and you will need to repeat

the switch-on procedure to activate the Power Port again. You cannot run

two Smart Port Technology accessories at the same time. You choose either

Charge the Light, or Piggyback Battery, or Remote Switch or RedEye lights.