Owner`s manual

www.exposurelights.com
11
Remote
Switch
REMOTE SWITCH
New for 2009 Exposure lights come with Smart Port Technology. This is the
option to run various accessories from the Power Port such as the Remote
Switch.
Available to purchase as an accessory, the remote switch simply plugs into
the power port on the back of the light unit. Using the Velcro strap supplied,
attach the Switch to your handlebar near the grip or were you want it. You
can now turn the light on/off and switch between modes as normal, without
having to touch the light itself. The Function and Fuel Gauge indicators on
the button remain operative when using the Remote Switch.
Use the Remote Switch for easier switching in the dark, especially when
wearing winter gloves, taking advantage of the larger button on the Remote
Switch.
Dip your lights. Just as cars dip their headlights for oncoming traffic and
cyclists, we recommend that Exposure Light users respect others in the
same way. On the road or on the bike path our lights are so bright in MaXx
mode that it is recommended to “dip” down to Low light mode when
someone is coming towards you. With the Remote Switch this can be easily
and quickly done with two clicks of the button. One more click and you are
back up to MaXx mode. Be seen but also respect others and be safe in the
dark.
Warning: Do not plug in the Remote Switch when with the Power Port active
as the light will not function. You will need to switch off, switch on and then
plug in the Remote Switch.
Remote Switch fits MTB
and Road handlebars
Power Port for Remote Switch