2009 Owner’s Manual Features • CFD Cable Free Design • Super LED light source • Memory free Li-ion batteries • Hardwired batteries • Smart Port Technology • “Smart” recharging • “PiggyBack” plug in battery option • Remote switch available • RedEye rear light available • RedEye Micro light available • One size fits all QR bracket • Fuel gauge battery life indicator • Light mode indicator • Long burn times • Reserve fuel tank • Collimated lenses • Dual beam optics (DBO) • Lightweight • Forged alloy quick rel
EXPOSURE LIGHTS SPECIFICATION LED’s LED Output Battery mAh Mode - Hours MaXx Ride Low Flash Weight gms Joystick 1 240 2350 3 10 24 Days! 76 Race 2 480 4700 3 10 24 Days! 190 Enduro 3 720 7050 MaXx-D 4 960 9400 3 10 24 Days! 230 3 10 24 Days! 298 Recommended Operating Temperature Range: -15C / + 40C Output MaXx Output / Burn Time Ride Low 3 10 Hours 24 Exposure Lights use collimated design Lens technology with Dual Beam Optics.
Please read all instructions before using your EXPOSURE LIGHT EXPOSURE LIGHTS - the lightest high output production sports lights. Designed for high performance applications, EXPOSURE LIGHTS combine the latest LED technology with a powerful Lithium Ion battery. Before using, please familiarise yourself with this manual, so that you understand how to operate and care for your EXPOSURE LIGHT. Warning EXPOSURE LIGHTS are a very powerful lighting system. Always use care when operating.
Box Contents Please ensure that the following contents are included with your purchase. If any of the items are missing please contact your place of purchase. RACE MaXx2, ENDURO MaXx2 & MaXx-D Smart Charger Light Unit QR Handlebar bracket Bracket bolt Cleat Rubber strips for 31.8 Cleat bolt 25.4 – 26.0 spacer Photo: Geoff Waugh 4 www.exposurelights.
JOYSTICK MaXx2 – with helmet bracket Smart Charger Light Unit Helmet bracket upper Helmet bracket lower disc Short & long nylon blots JOYSTICK MaXx2 – quick release handlebar bracket For 2009 models the Joystick is supplied with either the Helmet Bracket or the Quick Release handlebar bracket and QR Clip. Additional brackets are available from your place of purchase as accessories. Smart Charger Light Unit QR Handlebar bracket Bracket bolt QR Clip Rubber strips for 31.8 25.4 – 26.
How to Mount the EXPOSURE Race & Enduro MaXx2 models to the bar • Mounting to a 31.8mm bar - Peel off backing of the rubber protection strips and attach the pads to the inside of the clamp. Attach the bracket to the bar. Tighten the clamp with a 4mm hex key. (Maximum 2.5Nm) DO NOT OVER TIGHTEN! • Mounting to a 25.4 or 26mm bar - Clip the bracket spacer over your bar, attach the bracket over the spacer and tighten the clamp with a 4mm hex key.
How to Mount the EXPOSURE Joystick MaXx2. Helmet mounted The highly acclaimed Joystick helmet bracket works as a ball joint. Follow these instructions for set up and position the light for riding. The clamp is made up of three parts: Lower clamp disc, upper clamp with ball joint socket and a nylon clamp bolt. • Put the shorter plastic bolt through the lower clamp disc and align with a selected vent on the inside of your helmet. • Place the upper clamp through the top of the vent to meet the bolt.
LIGHT OPERATION Function Button Located on the back of the light unit is the function button. This operates the light unit and informs you of the mode setting and the battery power status. Function button When the light is on and function button is pressed, the colour of the button for the first two seconds informs you which mode has been selected. Thereafter the colour of the button is your fuel gauge.
Smart Charging MaXx2 light Before riding with your Exposure MaXx2 light please charge it fully. Follow the recharging instructions below. Use only genuine Exposure Lights chargers. International socket chargers are available, also in-car charger. EXPOSURE LIGHTS use the highest quality Lithium Ion batteries, which have no charge memory. This allows them to be recharged at any point during the discharge cycle. Burn times will not be affected by multiple re-charging.
PIGGYBACK BATTERY An outstanding feature of the MaXx range is the ability to extend burn times with Piggyback batteries. Piggyback batteries are available as single or triple cells and are supplied with velcro attachment strap and fitting block. They can be mounted under the stem, to the helmet, on the light unit itself (walking) or carried in your pocket or backpack.
Remote Switch New for 2009 Exposure lights come with Smart Port Technology. This is the option to run various accessories from the Power Port such as the Remote Switch. Available to purchase as an accessory, the remote switch simply plugs into the power port on the back of the light unit. Using the Velcro strap supplied, attach the Switch to your handlebar near the grip or were you want it. You can now turn the light on/off and switch between modes as normal, without having to touch the light itself.
redeye rear light New for 2009 Exposure lights come with Smart Port Technology. There is the option to run various accessories from the Power Port such as the RedEye rear light or the RedEye Micro light. These are available to purchase from your Exposure dealer. If you are a cyclist using the Exposure Light you will be aware of how important it is to be seen from behind as well as from the front to remain safe from other road users.
redeye micro RedEye Micro: Designed as a affordable plug-in rear light for the Joystick the Micro is a must have accessory for all Joystick MaXx2 owners. Activate the Power Port as described on page 12 and plug in the RedEye Micro directly. The LED is angled so rotate to angle down to allow for helmet position when riding. There is minimal drain on burn time for main light when using RedEye Micro. Spares and Accessories See your dealer for additional accessories to enhance your night time experience.
MAINTENANCE Inspect and test your EXPOSURE light before every outing. Keep your EXPOSURE light clean, and the lenses free of debris. The collimated lenses are made of hi-tec plastic but can be scratched. Be careful when cleaning any mud or dirt from the lens. Never use a high pressure spray or hose on your EXPOSURE light. Do not use harsh abrasive or corrosive materials to clean your EXPOSURE light. Follow all charging instructions.
EXPOSURE WARRANTY Quick and simple - register your EXPOSURE LIGHTS at www.exposurelights.com If this is not possible please fill in the form below and return it to Exposure Lights at USE. Name: E Mail: Address: City/Town: County / State: Country: Post / Zip Code Model Purchased: MaXx-D Enduro MaXx2 Race MaXx2 Joystick MaXx2 Serial Number: Date of Purchase: / / Dealer Contact Details EXPOSURE LIGHTS ULTIMATE SPORTS ENGINEERING Units 6 & 7 Hampers Common Ind. Est.
Ultimate Sports Engineering Limited Petworth, West Sussex GU28 9NR England UK Tel:+44(0) 1798 344477 Fax:+44(0) 1798 344499 info@exposurelights.com or info@use1.co.uk Photo: Geoff Waugh www.waughphotos.com Riders: 69er Collective, Trippy Tucker and Shaggy Printed Sep08. All specifications correct at time of print, subject to change and improvement. Check www.exposurelights.
