User Manual

Setting DMX-Address
The DMX start address of the fixture is set in the menu ADDRESS. This is retained even when
changing the personality.
MENU
Setting DMX-Personality
MENU
The personality is set in the menu PERSONALITY. There are four different modes which can be
choosen: HSIC (8 channels), SSP (8 channels), TOUR (12 channels) and TR16 (17 channels).
Edit Static Colours
Static colours for stand-alone operation are set in STATIC. These are mixed using the DMX value
scale 0-255 for RED, GREEN, BLUE, WHITE and ZOOM, as well as the STROBE value 0-25Hz.
MENU
Activating Auto Programs
In the menu AUTO PROGRAM the automatic programs stored in the device are activated. The
programs AUTO1 to AUTO10 are permanently stored in the device. The programs PROGRAM1 to
PROGRAM10 are editable. This is described under Edit User Programs. Automatic programs are
transmitted as master to connected slave devices. For master-slave operation, signals are sent via
the DMX line. This may disturb other devices on the same line.
MENU
E-26
PERSON
HSICADDRESS
001 - 512
PERSON
PERSONALITY
HSIC
DMX
HSIC
HSIC
HSIC
TOUR
HSIC
HSIC
SSP
Tr16
PERSON
HSIC
STATIC
RED
HSIC
HSIC
HSIC
GREEN
BLUE
WHITE
ZOOM
HSIC
R.(0 - 255)
HSIC
HSIC
HSIC
G.(0 - 255)
B.(0 - 255)
W.(0 - 255)
Z.(0 - 255)
HSIC
STROBE
HSIC
ST.(0 - 25)
PERSON
AUTO PROGRAM
HSIC
AUTO1
o
o
o
HSIC
AUTO2
HSIC
AUTO10
HSIC
PROGRAM1
HSIC
PROGRAM2
HSIC
PROGRAM10
o
o
o
SPEED 0 - 255