User Manual

Table Of Contents

Edit static color

R.(0~255)

G.(0~255)

B.(0~255)

W.(0~255)

STAT

ST.(0~20)

In the Menu „STAT“ values of each function for Stand-Alone operation can be set.

Set and combine the range (0-255) for Red, Green, Blue, White an Zoom for 0-100%,

also Strobe for 0-20Hz.

AT.01

AT.02

AT.10

AUTO

PR.01

PR.02

PR.10

Activate auto programs

In the Menu „AUTO“ pre-programmed programs can be activatet.

The programs „AT01" to „AT10" can not be edited. The programs „PR01" to „PR10" are editable.

For further explanation see „Edit custom programs“

Autoprograms will be send to connected devices. For the

Master-Slave operation Signals will be send via DMX-Cable. This may cause disturbence on

other devices.

Run mode

RUN DMX

SLAV

In the Menu „Run“ the Run-mode will be set.. For operation with a DMX-controller

select „DMX“. For use as Slave select „SLAV“.

In Slave-mode the unit recives static color or auto-program from the master-unit.

D.(001~512)

DMX

Set DMX-Adress

Set the DMX-Adress of the unit in the „DMX“ menu.

E-09