User Manual

Calibration and whitebalance
MENU
CAL
WT.01
CAL1
****
WT.11
CALR
****
OKCALR
RGBW
R(0~255)
G(0~255)
B(0~255)
CAL2
R(0~255)
G(0~255)
B(0~255)
W(0~255)
Password „UP“-“DOWN“-“UP“-“DOWN“
„CAL1" select WH.01 to WH.1 to calibrate the pre-programmed whitecolors.
RGBW is used to mix pre-programmed colors.
„CAL2" adjusts the output when the DMX-controller sends 255 on RGBW.
„CALR“ sets all calibrations to factory-default.
Zoom range
In the menu „ZOOM“ the limit of the zoom-chanenl can be edited.
If using a DMX-controller you are only able to access to the range between „POS1" and „POS2".
E-12