TourLED 28 MKIII User Manual
The enclosed General Informations for Expolite Units are part of these user manual. Read them carefully before operating the device. by FOCON SHOWTECHNIC Vertriebsgesellschaft mbH Teichweg 4+6 D-49504 Lotte/Wersen Telefon: +49 (0) 541-77095-0 Fax: +49 (0) 541-77095-27 info@focon-showtechnic.com www.focon-showtechnic.
Inhalt - Content ENG Content Delivery Product Information Dimensions Installation Operation Using DMX512 Controler Page E-04 E-05 E-06 E-07 E-08 E-13
Delivery - Expolite TourLed 28 Pro Zoom CM+W MKIII - Displaycover - Powercord - General Information for Expolite Units - User Manual Expolite units are checked before shipping.
Specifications Art.No.: led28426 Voltage 100V - 240V AC 50/60Hz Powerconsumption 128W Dimensions 334 x 191 x 236 mm Weight 6.6 kg Connectors Power In/Out | DMX In/Out Temperature -20°C - 45°C Humidity* < 80% IP rated IP 65 Housing Die-cast aluminium, black LED´s 7 x 20W 4in1 RGBW Angle 8°- 40° Control Stand-Alone / Master-Slave / DMX512 DMX-Channels 3 - 25 (3/4/5/6/7/12/17/25) 40° 5 8° 0.73 0.14 2.18 0.42 3.64 0.70 5.10 0.98 7.28 1.
Dimensions 236 E-06
DMX Addr.1 DMX Addr.(Nx1)+1 DMX Addr.(Nx2)+1 ............
Display Panel operation Display operation Back Enter or Save Up Down MENU: ENTER: UP: DOWN: MENU ENTER UP DOWN Menumap MENU STAT R. (0~255) G. (0~255) B. (0~255) W. (0~255) ST. (0~20) AUTO AT.01 AT.02 AT.10 PR.01 PR.02 PR.10 RUN DMX SLAV DMX D.(001~512) PERS RGB TOUR TR16 AR1.D RGBW 8BIT 16BI SSP ARC.2 EDIT PR.01 PR.02 AR2.D AR2.S SC.01 SC.02 PR.10 SC.30 SET UPLD REST COLO DIM R.(0~255) G.(0~255) B.(0~255) W.(0~255) S.(0~20) T.(0~255) F.
Edit static color MENU STAT R. (0~255) G. (0~255) B. (0~255) W. (0~255) ST. (0~20) In the Menu „STAT“ values of each function for Stand-Alone operation can be set. Set and combine the range (0-255) for Red, Green, Blue, White an Zoom for 0-100%, also Strobe for 0-20Hz. Activate auto programs MENU AUTO AT.01 AT.02 AT.10 PR.01 PR.02 PR.10 In the Menu „AUTO“ pre-programmed programs can be activatet. The programs „AT01" to „AT10" can not be edited. The programs „PR01" to „PR10" are editable.
Personality In the Menu „PERS“ the DMX-Personality will be set. Choose and select the personality. Benutzerprogramme editieren In the Manu „EDIT“ custom auto programms „PR01" to „PR10" can be edited. Each program has 30 steps that can be edited. Each step contains the values for RGBW, Zoom, Strobe (0-20Hz), step-time and fade-time. Custom programs can be uploaded from a master-device. See „special settings“ Special settings „KEY“: enables(ON) or disables(OFF) automatic lock-out with password-protection.
„COLO“: In the Menu Color the color-kalibration can be selected or deactivated. If „RGBW“ is selected the maximum DMX-value (255) will be limited to the stored value in „CAL2". If „UC“ (Uniform-Color) is selected the factory-calibration will be used. RGBW output is balanced to differend generations of units. If „OFF“ is selected the calibration is disabled. RGBW reaches maximum power without limit by calibration. „DIM“: Different dimming-speeds can be selected from fast (DIM1) to slow (DIM4).
Calibration and whitebalance Password „UP“-“DOWN“-“UP“-“DOWN“ MENU CAL **** CAL1 R(0~255) G(0~255) B(0~255) W(0~255) WT.01 WT.11 CAL2 CALR RGBW R(0~255) G(0~255) B(0~255) **** CALR OK „CAL1" select WH.01 to WH.1 to calibrate the pre-programmed whitecolors. RGBW is used to mix pre-programmed colors. „CAL2" adjusts the output when the DMX-controller sends 255 on RGBW. „CALR“ sets all calibrations to factory-default. Zoom range In the menu „ZOOM“ the limit of the zoom-chanenl can be edited.
Using DMX512 CHANNEL ASSIGNMENT This unit has different DMX-Personalities with different amount of DMX-channels. 10 DMX-Personalities with 3, 4, 5, 6, 7, 12, 17 und 25 channels are available.
E-14
E-15
E-16
E-17
E-18
E-19
E-20
E-21
© 2021 by Focon Showtechnic Vertriebsgesellschaft mbH
