Instruction manual

11. Electronic control panel MONROC

11.1. Programming the electronic control panel

Keep pressing the continuous button, on either of the two control panels, for 8 seconds. The

continuous coffee lights will blink on and off.

Press the coffee dose you want to reprogramme (1 espresso - 1 large coffee - 2 espresso -

2 large coffees). It will then begin to dispense coffee. When you have reach the desired dose,

push the dose you selected once more to end the process, and the dose will be remembered.

Repeat the process for the other buttons.

Very important: When you reprogramme a dose in the left hand control panel (looking at the

machine from the front), the dose will be remembered in both control panels.

Example: If we re-programme the dose of the small coffee button on the left control panel, the

new dose which we have placed in the memory is remembered by the small coffee button on the

other control panels.

This only happens with the left control panel, if we re-programme another panel only that panel is

modiﬁ ed.

When reprogramming the coffee dose, fresh coffee must be used in the ﬁ lter.

FIG. 5

2. ESPRESSO

1. ESPRESSO

1. LARGE

COFFEE

2. LARGE COFFEES

CONTINUOUS

COFFEE