Instruction manual

7.
10. Dispensing coffee MONROC
CONTROL MODEL
a) Pull the fi lter holder away from the machine.
b) Place the amount of coffee you need for coffee of your choice in the fi lter.
Preferably, the coffee should have been recently ground. Use the appropriate fi lter holder
See Fig. 3-.
c) Push the coffee down with the coffee press.
d) Select the desired option from the electronic control panel.
The panel is pre-programmed with 4 standard doses (which can be programmed to your taste,
see programming) and a continuous dispensing option. The fi rst four buttons
(1 small coffee - 1 large coffee - 2 small coffees - 2 large coffees) are automatically
disconnected, and the fi fth is for continuous coffee, to disconnect it push it again
ALWAYS LEAVE THE FILTER HOLDER ENGAGED IN THE UNIT.
It is very important to keep it at the ideal temperature, so that you can get
a good expresso coffee.
.
Filter holder for two
doses of coffee
Filter holder for one
dose of coffee
Filter for two doses of
coffee
Filter for one dose of
coffee
FIG. 4