Instruction manual

6.
Water is refi lled automatically.
9. Fitting the fi lter holder into the dispensing unit MONROC
10. Coffee dispensing MONROC
CORRECT POSITION OF THE HOLDER IN THE UNIT
CORRECT THE RUBBERS ARE WORN
FIG. 2
PULSER MODEL
a) Pull the fi lter holder away from the machine.
b) Place the amount of coffee you need for coffee of your choice in the fi lter.
Preferably, the coffee should have been recently ground. Use the appropriate fi lter holder
See Fig. 4-.
c) Push the coffee down with the coffee press.
d) Position the fi lter holder into the unit and make sure that it is really tight,
see Fig.3-, place the cup below the fi lter holder’s outlet, and activate the dispensing
switch, - see (4) Fig. 1-.
FIG. 3
FITTING THE FILTER HOLDER INTO THE
DISPENSING UNIT
The fi lter holder has two projections on the sides which
must be fi tted into the unit’s slots. When that has been
done, turn from left to right until the handle of the holder
is at a perfect right angle to the coffee machine.