Specifications

9-16
HOW TO USE YOUR MOTORHOME’S
EQUIPMENT
1 - Open access door and pull
retaining clips upward.
2 - Remove cassette by pulling
straight out. When cassette hits
stop, tilt downwards
3 - Position tank vertically and
swivel pour-out spout upwards.
4 - Remove dosage cap and pour-out spout.
Add toilet fluid in the dosage cup. Add
approx. 2L of water through spout to cover
tank bottom. Replace cap, return pour-out
spout to original stored position.
5 - Slide the holding tank into position
through access door. Never force
insertion as this can cause damage to
the toilet.
6 - Make sure the retaining clip secures
the holding tank. Close and lock the
access door.