Specifications

9-1
HOW TO USE YOUR MOTORHOME’S
EQUIPMENT
HOW TO USE YOUR
MOTORHOMES EQUIPMENT
Within this section of your motorhomes
handbook we will give you brief details on how
to operate all of the motorhomes equipment
from the gas cooking equipment to the window
blinds. For further details on the major
equipment within your motorhome please read
the individual appliance instructions contained
with your user information pack.
Please Note: Before attempting to use any gas
equipment please ensure that the gas bottle is
connected securely to the motorhomes regulator
via a high pressure gas hose and the bottle valve
is in the on position. Also ensure the appliance
isolation valves are in the on position as shown in
the gas system section.
Please Note: Before attempting to use any
electrical appliance please ensure that you have
connected the mains connection cable to a mains
hook up and that the mains isolation switch is in
the on position. Ensure the 12V master switch is
in the ON position. This is found in the side of
the unit next to the entrance door.
HOW TO OPERATE YOUR
MOTORHOME ENTRANCE DOOR
From the Outside
To Unlock
Insert the key and turn key anti clockwise until it
is in a vertical position, then return it to a
horizontal position. This will unlock the door.
Now pull the handle toward you and the door
should open.
To lock the door.
Ensure the locking pins on the inside of the door
are in the position shown in figure 1 and then
close the door using a reasonable force.
Note. The door fitted is of a burst proof type and
therefore requires more force to close than a
normal motorhome door.
Once the door is closed insert the key and turn
the key clockwise until it is in the vertical
position then returning it to the horizontal
position. Remove the key then pull the handle to
ensure the door is locked.
From the inside
To open the door
Ensure the locking
pins on the inside of
the door are in the
position shown in
figure 1 and then
close the door using
a reasonable force.
Note. The door
fitted is of a burst
proof type and
therefore requires
more force to close
than a normal
motorhome door.
Turn the inside
door knob
clockwise while simultaneously pushing the door
open. The knob will return to its original position
once you release it.
To close and lock the door
Turn the knob anti clockwise the knob will click
into a position and remain there. The door is now
locked. Please note that due to British Safety
standards this door cannot be locked using a key
from the inside.
CAUTION It is strongly recommended that
only Gas Safe Register™ approved gas fitters
carry out any work on your motorhomes gas
installation.
High Pressure Gas Hoses
You should only connect to this regulator using a
length of approved high-pressure hose not
exceeding 450mm from the gas cylinder to the
regulator. These approved high-pressure hoses
are available from your Explorer Group Retailer.
These hoses are connected using screw thread
fittings, which will make a seal if connected and
tightened using a spanner. Once the hose is
securely connected turn on the gas tap above the
regulator, then turn on the gas bottle to allow gas
to flow into the motorhome.
In order to make all your motorhome gas
appliances operational it is necessary to open
each appliance gas tap as detailed in previous
column. All your gas appliances should now be
operational. Instructions on how to use each
Figure 1