Specifications

13. Replace lever and fix with screw. NOTE: Do
not overtighten screw.
14. Replace lever cap.
Please consult your dealer if in difficulty. If they
are unable to solve the problem, contact
Whale Customer Services: tel: [phone]
ext. 211 or 213.
OPERATION
These taps are operated by turning the
separate hot and cold taps. To get the desired
water temperature turn on both hot and cold
taps.
PLEASE NOTE
A. When only the hot water tap is turned on the
temperature of the water can be very high.
B. For winter storage the taps must be left in
the fully open position.
MICRO-SWITCH REPLACEMENT
The micro-switch on the Whale taps can be
located by removing the base plate by undoing
the 4 fixing screws. The micro-switch can then
be replaced by following the Whale
instructions contained in your Owner's
Information Pack.
CLEANING OF ALL TAPS
It is recommended that a non-abrasive damp
cloth be used for cleaning the Elegance taps
and showers.
REICH TAPS AND SHOWER (FITTED
IN AVANTGARDE/SUNSEEKER AND
AUTOSTRATUS/CASTAWAY)
THE KERAMIK ‘MONO’ TAP
The Keramik ‘Mono’ tap (Fig. 1) is a single flow
tap (hot or cold) controlled by a lever which is
rotated anti-clockwise to turn on. The housing
is made from high quality plastic.
THE KERAMIK ‘TWIST’ MIXER TAP
The Keramik ‘Twist’ mixer tap (Fig. 2) is a
single lever mixer tap, The flow is governed by
lifting and lowering the lever. Temperature is
controlled by rotating the lever anti-clock wise
allowing cold water to flow first followed by
further rotation to obtain hot water. The water
27
MOTORHOME EQUIPMENT
1
2
4
3
6
5