Specifications

VENTILATION
All motorhomes manufactured by the
Explorer Group Limited are ventilated at
both high and low level in accordance
with BSEN 721 Safety Ventilation. The
fixed ventilation points fitted in your
motorhome must not be blocked under
any circumstances as your safety may
depend upon them.
It is advisable that the fixed ventilation
points are checked and cleaned (where
necessary) on a regular basis.
HIGH-LEVEL VENTILATION
This is always provided by fixed
ventilation within the fitted roof skylight.
All roof skylights fitted by Explorer Group
provide fixed free area ventilation. These
roof skylights should be cleaned annually
by use of a small brush to remove any
dust that may have accumulated around
the mesh fitted. On some roof skylights
the mesh can be easily removed to aid
cleaning. On fan-assisted roof skylights it
is essential that the roof skylight be
switched off prior to cleaning.
LOW-LEVEL VENTILATION
All Explorer Group Motorhomes have the
low level ventilation provided by fixed
vents in the door step well. There is one
vent fitted in the Autoquest / Avantgarde
ranges. The Autocirrus / Calypso and
Autostratus / Castaway models have two
vents fitted.
These vents are fitted with a black plastic
vent cover and can be cleaned using a
small brush.
It is essential that these vents are not
obstructed.
VENTILATION IN SEPARATE
BEDROOMS
In motorhomes with sleeping areas
separated via a solid door, separate
ventilation is required and is provided via
a roof skylight at high level and a
ventilator at low level within a bed box.
GAS DISPERSAL HOLES
All appliances and gas unions have a gas
dispersal hole nearby. It is essential that
these are not blocked or made ineffective.
24
Safety