Specifications

CONTROL PANELS
ELECTRICAL CONTROL PANELS
Your Explorer Group Touring caravan will
be fitted with one of the following
electrical control panels.
AVANTÉ & CORONA
The right hand control panel operates the
water pump by pressing the switch-
marked pump down. Whilst the pump is
running the bottom neon light marked
pump run will illuminate.
The top neon light will give a battery
condition reading when the power is
switched on. A green light indicates that
the battery is fine this will change to
amber and then red as the battery
discharges.
This unit also contains a 12v socket and
TV aerial connection. A mains 230v
socket is also fitted to this unit.
The Avanté and Corona are also fitted
with a 12V master switch, which is
positioned near the exterior door.
ODYSSEY & OMEGA
The control panel operates the main 12V
system via the master switch. This switch
is in the on position when the 'I' symbol is
depressed. It also gives a voltage reading
for the battery when the master switch is
in the 'on' position.
The pump switch when in the 'on' position
indicated by the 'I' symbol will allow the
submersible pump to run and provide
water to the taps and shower unit.
CRUSADER & RALLYE SINGLE AXLE
MODELS
The control panel operates the main 12V
system via the master switch. This switch
is in the on position when the 'I' symbol is
depressed. It also gives a voltage reading
for the battery when the master switch is
in the 'on' position.
The pump switch when in the 'on' position
indicated by the 'I' symbol will allow the
submersible pump to run and provide
water to the taps and shower unit.
Crusader Black - Rallye Biege
Odyssey Black - Omega Beige
Avanté Black - Corona Biege
36
Equipment Use