User manual

37
LiveCello & LiveBass H-clamp
LiveCello and LiveBass H-clamps are designed to fit essentially all standard
acoustic versions of these instruments. Their respective adjustment ranges
are as follows.
LiveCello H-clamp will fit instruments of widths:
114mm - 144mm
LiveBass H-clamp will fit instruments of widths:
198mm - 228mm
The general guidelines for use of the H-clamp are largely common to both
cello and double bass, so the information contained in this section can be
used interchangeably unless stated otherwise. The guidance provided is
solely to indicate some of the more popular and/or obvious ways of using
the H-clamp on a cello or double bass. There is no need to restrict your use
of the H-clamp to these suggestions, its design invites experimentation and
allows you to adapt its use specifically to your own instruments, playing
styles and sound preferences. More information about applications for the
H-clamp can be found in the Applications pages for LiveCello and LiveBass
on the Exploraudio web site (exploraudio.com).
Silicone sleeves are provided to protect the ridge or ‘lip’ around the edge
of the bodies of cellos and double basses. These can be fitted very quickly
and easily:
4b
1. Remove the ‘O’-rings from
the stalks of both clamp disks
2. Slip the silicone sleeves
over the clamp disk stalks
3. Replace the ‘O’-rings