User manual

14
The microphone and clip
/ mount combinations
shown on the previous
page illustrate the range
of possibilities for using
different types of micro-
phone with the H-clamp.
Anything from the lightest
lavalier (tie clip / but
-
ton style) microphone to
some of the largest studio
condenser mics can be
used with the H-clamp.
But the heavier and more
bulky the microphone,
the more care must be
taken when attaching it
to your instrument.
No matter how keen you are to start experimenting with your
new “H”, please read these notes on basic usage with different
kinds of microphones carefully before attempting to attach it
to your instrument, particularly if your chosen microphone is
large and / or expensive.
Fitting the H-clamp
It is usually easier to attach the H-clamp to the instrument before attach-
ing the microphone but with small lavalier microphones (or the BlueAir
Bluetooth Wireless Headset, BH-01), it may be just as easy to attach them
to the clamp first.
Where possible, it is normally more convenient to connect the audio cable
to the microphone after fitting the H-clamp but if it is not detachable (eg.
lavalier mics), care must be taken not to tangle the wiring with the clamp
or to trap it between the clamp disks when tightening them to the instru
-
ment.