Use Instructions

5
37
36
willowpump.com l text or call 1-888-WILLOW-3 Willow Wearable Breast Pump Generation 3 Instructions for Use
AFTER EVERY USE, FOLLOW THESE DIRECTIONS TO CLEAN FLANGE & FLEXTUBE™:
1. RINSE IMMEDIATELY Separate Flange from Pump, then separate Flextube
™
from Flange, and rinse both parts with water to avoid buildup of breast
milk residue and prevent bacterial growth.
2. SOAK FOR 5 MINUTES Using mild dish washing soap, soak both parts in
very warm, soapy water for 5 minutes (minimum).
3. WASH + BRUSH THOROUGHLY Using the two Cleaning Brushes provided,
wash each part separately in soapy water for 60 seconds (minimum)
and brush for 30 seconds (minimum) as follows:
5. CLEANING, TRANSFER & STORAGE
CLEANING & MAINTENANCE
First Time Use After Each Use
Pump
Wake up Pump by plugging in
for a few seconds.
No cleaning required; wipe with
damp cloth as needed.
Do not immerse Pump in water.
Flange & Flextube
™
Boil for 10 minutes.
Do not microwave Flange.
See detailed instructions in
Section 2. GETTING STARTED
- Boil Flange & Flextube.™
Clean with mild dish washing soap
and brushes provided.
See detailed instructions in Section 5.
CLEANING, TRANSFER & STORAGE.
Milk Bag
Milk Bag is disposable and NOT for reuse.
Do not microwave Milk Bag.
Discard after each use and do not reuse.
TIP: FLANGE AND FLEXTUBE
™
ARE DISHWASHER SAFE USING TOP RACK ONLY.
WARNINGS:
DO NOT wash or sanitize Pump.
Wipe with clean, damp cloth, if needed.
DO NOT use harsh chemicals to clean Flange and Flextube.
™
Use mild dish washing soap.
g 5a Insert small
brush into
Spout and clean.
g 5b Use large brush to clean inside
top opening and body being
careful NOT to push brush all the
way through Tip at bottom.