Replacement Part List

How to use AC 220V/110V
S200 is with 220V50Hz/110V60Hz pure-sine wave and with
rated power of 200W. Please note the following before
using it：
1 . The input voltage and frequency of the appliance must
be the same as that of the S200.
2 . Please ensure that the rated power of the appliance is
less than the rated power of the 200W power supply,
preferably within 80% of the rated power.
* The appliance will be damaged once above needs are not
met.
* Please choose another portable power pack with higher
power once the power of appliances is higher than that of
S200.
: There is a protection function about 10
Remarks
seconds if the load you used is over the rated power, so
S200 is very suitable for electrical appliances that are within
the rated power of S200. But since the consumed power of
some appliances is greater than its rated power on
power-on, the overload protection will occur and power
output will turn off. For example, the general starting current
16