Material Safety Data Sheet
III
Skin
Rubber gloves, Apron, Safety 
shoes
Protective  equipment  must  be  worn  if  battery  is  cracked  or 
otherwise damaged.
Respiratory
Respirator (for lead)
A  respirator  should  be  worn  during  reclaim  operations  if  the 
TLV exceeded.
Eyes
Safety goggles, Face Shield
 In  the  UK  use  of  this material must  be  assessed  under  the 
COSHH regulations.
SECTION 5--- FIRST AID MEASURES 
Emergency and First Aid 
Procedures
Contact with internal components if battery is opened/broken.  
1. Inhalation   Remove  to  fresh  air  and  provide  medical  oxygen/CPR  if  needed.  Obtain  medical 
attention.
2. Eyes   Immediately ush with water for at least 15 minutes, hold eyelids open. Obtain medical 
attention.
3. Skin   Flush  contacted  area  with  large  amounts  of  water  for  at  least  15  minutes.  Remove 
contaminated clothing and obtain medical attention if necessary.
4. Ingestion   Do not induce vomiting. If conscious drink large amounts of water/milk. Obtain medical 
attention. Never give anything by mouth to an unconscious person
SECTION6--- FLAMMABILITY DATA 
Components   Flash Point
Explosive 
Limits
Comments  
Lead   None  None 
Sulfuric Acid   None   None 
Hydrogen
259ˇć
4%-74.2%
Emit hydrogen only if over charged (Voltage>2.4 VPC). To avoid the 
chance  of  a  re  or  explosion,  keep  sparks  and  other  sources  of 
ignition  away  from  the  battery.  Extinguishing  Media:  Dry  chemical, 
Foam, CO2
Fiberglass 
Separator
N/A  N/A  Toxic  vapors  may  be  released.  In  case  of  re:  wear  self-contained 
breathing apparatus.
ABS   None   N/A  Danger: Vapors may cause Flash Fire. Harmful or Fatal if Swallowed. 
Vapor Harmful.
PP
None
N/A
Temperatures over 300 
o
C (572
o
F) may release combustible gases. In 
case  of  re:  wear  positive  pressure  self-contained  breathing 
apparatus.
SECTION 7--- REACTIVITY DATA 
Components
  Lead/lead compounds  
Stability  Stable  
Incompatibility  Potassium, carbides, suldes, peroxides, phosphorus, sulfurs  
Decomposition 
Products
Oxides of lead and sulfur.  
Condition To Avoid
High temperature, Sparks and other sources of ignition.  







