Owner manual
Using the Quantizer with the Expert Sleepers ES-4
The ‘ES-4’ button replaces the loaded calibration (if any) with one perfectly
tuned for the Expert Sleepers ES-4 module, assuming the ES-4’s factory
calibration. The output of the Quantizer can then be passed to the ES-4
Controller plug-in, to be routed in turn to the ES-4’s channel 1 or 2.
And with the Expert Sleepers ESX-4CV
The ‘ESX-4CV’ button replaces the loaded calibration (if any) with one per-
fectly tuned for the Expert Sleepers ESX-4CV module, assuming the ESX-
4CV’s factory calibration. The output of the Quantizer can then be passed
to the ESX-4CV Combiner plug-in.