User guide

Command Description
by the server connection information. See
Connecting to servers
for more information
Example
rdbthincontrol> show server
rdbthincontrol> show server myserv
rdbthincontrol> show server //prod_node:1766/
rdbthincontrol> show server 1701
rdbthincontrol> show active servers
rdbthincontrol> show server //prod_node:1766/ fred mypass
6.4.3.2 Command mode
The command mode commands available to show servers can be seen in Table 6–10
Command Mode Show Server.
Table 6-10 Command Mode Show Server
Command
Description
-showServer -active
-showServer -all
Shows active servers as well as the server definitions
as found in the configuration file used to start the
controller
The following Command line options, if present will
be ignored:
• -name
• -node
• -port
• -URL
-all and –active in this context are considered
synonyms.
-showServer -stored
Shows the server definitions as found in the
configuration file used to start the controller
-showServer
Shows the server as specified by other command line
options
82