Owner's manual
- 7 -
ENABLING 32-BIT CARD SUPPORT OF WINDOWS 95
(For Windows 98 the 32-bit card support is enbled by default.)
Your system should be ready for PCMCIA socket support prior to operating the PCMCIA Sound
Card. To check whether your computer is PCMCIA Socket supported, first, double-click on the
“System” icon from “Control Panel” folder (you can select the “Control Panel”
under “Settings” from the “Start” menu to open the “Control Panel” folder).
Click on the Device Manager Tab. If “PCMCIA Socket” is found with a cross
(x) sign next to the PCMCIA Controller as the following figure shown, it
means the PCMCIA device driver is not using 32-Bit Card Support.
In this case, double click on the PCMCIA Controller, and a dialog box will be
displayed as below. Please place a check mark next to the current
configuration of Device usage box, then select OK.