Owner manual

9-4

Adaptec Easy CD Creator Standard Edition

Stock Number: 511446-00, Rev. A Page: 9-4

Print Spec Number: 496513-00 Inside Text: 496512-00

Current Date: 5/8/98 Final Review

Select the destination drive that contains the blank CD. This is

your CD-R or CD-RW drive.

Make changes, if any, in the Advanced tab settings. See CD

Copier Advanced Tab Settings on page 9-5.

Select one of the following options:

– Test—Select this option to perform a test in which the files

to be recorded are passed to the CD recorder. No informa-

tion is recorded to the CD. Use this option if you have

made any changes to your CD recorder setup.

– Test & Copy—Select this option to perform a test in which

the files to be recorded are passed to the CD recorder.

Recording begins after a successful test.

– Copy—Select this option when you do not want to perform

the test. Use this option if you have successfully recorded a

number of similar CDs and you have not made any

changes to your CD recorder setup.

Select the number of copies you want to make.

Click Copy to begin recording a copy of your CD.

Follow the on-screen instructions and insert a blank CD when

prompted.

CD Copier begins copying the files and folders from your

source to a blank CD. A final message box notifies you when

the copying is complete.

Note:

To make a sleeve that lists the CD title and files, see

Chapter 10, Making a Custom Jewel Case Insert.