Owner manual

3-5
Making an Audio CD
Adaptec Easy CD Creator Standard Edition
Stock Number: 511446-00, Rev. A Page: 3-5
Print Spec Number: 496513-00 Inside Text: 496512-00
Current Date: 5/8/98 First Draft
5 Select Create CD from the File menu when you have finished
adding all of the songs you want to record to your CD layout.
The CD Creation Setup box appears.
6 Make changes, if any, to the CD Creation Setup settings (see
CD Creation Setup Settings on page B-1 for descriptions) and
click OK.
Easy CD Creator begins recording your CD layout to a blank CD.
When the CD is finished, a final message box appears notifying you
that the recording is complete.
.
Note:
To make a sleeve that lists the artist, CD title, and
songs, see Chapter 10, Making a Custom Jewel Case Insert.
Pre-recording Audio Tracks to Wave Files
Pre-recording audio tracks to Wave files on your hard drive is a way
to:
■ Minimize swapping CDs in and out of your drive if you want
to make more than one copy
■ Improve the sound quality if your CD recording system is less
than optimal
You can pre-record one Wave file at a time. To pre-record a Wave file
from an existing CD, follow these steps:
1 Insert the source CD, which contains the song you want to pre-
record to your hard drive, into your CD recorder.
2 Click the Audio CD Layout tab.
3 Select the audio track you want to pre-record from Explorer
and drag it into the Audio CD Layout window.
4 Highlight the audio track in the Audio CD Layout window.
5 Select Pre-record to WAV file from the Track menu.
Pre-recording audio tracks to Wave files requires approxi-
mately 10MB of space on your hard drive for one minute of
music.