User`s guide

REDUCING MONITORING LATENCY
69
Using CueMix Console
If your host audio software does not support direct
hardware monitoring, you run CueMix Console
side-by-side with your audio software and manage
your monitor mix in CueMix Console.
CueMix Console allows you to create up to four
separate Traveler monitor mixes, or any other
desired routing configurations. These routings are
independent of your host audio software. For
complete details, see chapter 10, “CueMix
Console” (page 71).
Controlling CueMix DSP from your audio
software
Some ASIO-compatible audio applications, such as
Cubase and Nuendo, allow you to control CueMix
DSP monitoring from within the application
(without the need to use CueMix Console). In
most cases, this support consists of patching a
Traveler input directly to an output when you
record-arm a track. Exactly how this is handled
depends on the application.
CueMix DSP routings that are made via host
applications are made “under the hood”, which
means that you won’t see them in CueMix Console.
However, CueMix DSP connections made inside
your host audio software dovetail with any other
mixes you’ve set up in CueMix Console. For
example, if your host application routes audio to an
output pair that is already being used in CueMix
Console for an entirely separate mix bus, both
audio streams will simply be merged to the output.
Follow the directions below in the section that
applies to you.
Controlling CueMix DSP from within Cubase or
Nuendo
To t u r n o n CueMix in Cubase SX or Nuendo,
enable the Direct Monitoring check box in the
Device Setup window (Figure 7-2 on page 53).
Other ASIO 2.0-compatible host software
If your ASIO-compatible host audio software
supports ASIO’s direct monitoring feature, consult
your software documentation to learn how to
enable this feature. Once enabled, it should work
similarly as described for Cubase (as explained in
the previous section).
Using CueMix DSP with WDM- or Wave-
compatible software
Run CueMix Console (chapter 10, “CueMix
Console” (page 71)) and use it to route live inputs
directly to outputs, control their volume and
panning, etc. If necessary, you can save your
CueMix Console setup with your project file.
!Traveler Manual/Win Page 69 Monday, November 29, 2004 3:50 PM