User`s guide

INSTALLING THE TRAVELER HARDWARE

CONNECTING MULTIPLE MOTU FIREWIRE

INTERFACES

Yo u c a n d a i s y-chain up to four MOTU FireWire

interfaces on a single FireWire bus, with the

restrictions described in the following sections.

Most computers have only one built-in FireWire

bus (even if it supplies multiple FireWire sockets).

Connect them as follows:

Figure 4-21: Connecting multiple Traveler’s (or other MOTU FireWire

audio interfaces) to a computer.

Multiple interfaces cannot be bus-powered

Do not run the Traveler under bus power when

connecting it with other devices to the same

FireWire bus. See “Power options” and “Bus power

requirements” on page 22.

Multiple interfaces in the MOTU FireWire Audio

Console

The MOTU FireWire Audio Console displays the

settings for one interface at a time. To view the

settings for an interface, click its tab as shown

below in Figure 4-22.

Figure 4-22: To view the settings for an interface, click its tab.

FireWire

!Traveler Manual/Win Page 37 Monday, November 29, 2004 3:50 PM