Technical data

Cash Register Express
Page 23
Hardware Setup
Installing the Touch Screen
Most touch screen monitors have three plugs:
 The first is a standard power cable.
 The second cable is a USB cable which must be
plugged into one of the USB ports on the back of
your computer.
 The third cable will plug either into the VGA port or
the DVI port depending on your computer.
After connecting the touch screen, insert the CD that
came with the Touch Screen monitor which will start
the Setup Wizard, or navigate to:
http://faq.pcamerica.com for certified drivers for
CRE/RPE.
Note: Depending on which touch screen monitor you
have will determine the cable arrangement.
Note: The touch screen may have another USB cable
for the MSR (magnetic swipe reader) which must be
plugged into one of the USB ports on the back of your
computer.
Step by step instructions of how to plug in your new POS hardware & peripherals and driver
installation for your hardware are located at: http://faq.pcAmerica.com/hardware. These instructions
are also contained on the installation CD that accompanied your system.