Technical data

Cash Register Express
Page 22
Hardware Setup
Configuring a Cash Drawer
1. The majority of cash drawers plug into the back of the
receipt printer. To install a Cash Drawer, first make sure the
cable that comes with your cash drawer is securely plugged
in to both the cash drawer and the receipt printer. A cash
drawer cable looks similar to a phone cable. There is often
writing on the cable that says “TO PRINTER” and “TO CASH
DRAWER” to ensure it is connected correctly.
2. Inside of the Setup Screen, drop down the Default Cash
Drawer Port inside of the Hardware tab and select however
your receipt printer is connected to the computer. This will
pop open the cash drawer attached to your receipt printer
for all cash transactions.
3. Select Update to save your changes.
If you are using more than one cash drawer at a register, please
refer to additional documentation located at
http://faq.pcamerica.com or contact technical support for
further assistance.
Step by step instructions of how to plug in your new POS hardware & peripherals and driver
installation for your hardware are located at: http://faq.pcAmerica.com/hardware. These instructions
are also contained on the installation CD that accompanied your system.