Technical data

Cash Register Express
Page 19
Hardware Setup
Installing a Bar Code Printer
It is necessary to add and configure the Bar Code
printer you are using inside of Cash Register
Express.
1. Some of the supported label printers only
require that a Generic / Text only driver is
installed, which is a standard Windows
driver.
NOTE: Not all label printers are installed like
this. Depending on which label printer you
have purchased your installation process may
differ.
2. Go to the Options Screen then, (4) Setup –
(L) Friendly Printer Setup.
3. Set the Label printer as the Generic / Text
Only driver (or the driver that has been
installed).
4. Select Save & Exit.
For more information on how to print labels using Restaurant Pro Express please see the Printing Bar
Codes Section of this manual.
Step by step instructions of how to plug in your new POS hardware & peripherals and driver
installation for your hardware are located at: http://faq.pcAmerica.com/hardware. These instructions
are also contained on the installation CD that accompanied your system.